Table of Contents
Advertisement
Commissioning
Power supply
• 5" panel: IEEE 802.3af PoE max. 6 W
• 7" panel: IEEE 802.3af PoE max. 9 W
• 10" panel: IEEE 802.3af PoE max. 12 W
• 15" panel: IEEE 802.3at PoE+ max. 19 W
• 21" panel: IEEE 802.3bt 4PPoE max. 32 W
Usage note
Information:
Ensure that the power supply has sufficient capacity to operate the device.
A shielded Cat 5 cable or higher must always be used.
The Power Panel must always be grounded with a shielded Cat 5 cable. Grounding of the device limits the effects
of noise due to electromagnetic interference on the control system. The ground connection can also be made using
the screws located near the connector. A label helps identify the ground connection. All electronic devices in the
control system must be properly grounded. Grounding must be performed according to applicable regulations.
50
Power Panel FT50 User's manual V1.19
Advertisement
Table of Contents
