Table of Contents
Advertisement
6 Commissioning
6.1 Calibration
Notice!
The PFT50 calibrates the touch screen each time it is started.
To guarantee an optimal display calibration there must not be any element or surface touching the
front side of the panel when it is being powered on. Other influences (e.g. lying down the device) must
also be avoided.
6.2 Rear view
Dimensions
*) 15.6" and 21.5" FT50 devices only
6.3 Ethernet connection
General
Image legend
c) Reserved
Status indicators
The Ethernet connection is equipped with two status indicators that
reflect the following information:
a) Red
OFF: A valid link has NOT been detected.
ON: A valid link has been detected.
b) Green
ON: No activity
BLINKING: Activity
Pinout
• See
"Cable pinout" on page
Power Panel FT50 User's manual V1.19
40
127.
Commissioning
a
8
b
1
c
49
Advertisement
Table of Contents
