Table of Contents
Advertisement
Instructions (wall bracket)
1. Insert the sealing rings into the flange.
2. Attach the round panel gasket first (see
3. Mount the flange feed-through including the sealing rings.
4. Secure the flange using the six rear screws.
5. To increase the service life and functionality of the sealing rings of the flange feed-through, grease the sealing
rings with appropriate oil.
6. Insert the pipe fixture into the flange.
7. Tighten the four screws on the flange (Torque: 1.3 Nm).
Power Panel FT50 User's manual V1.19
"General information" on page
34).
Installation
39
Advertisement
Table of Contents
