Vesa Bracket (6Accma11.0100-000) - ABB B&R FT50 User Manual

Installation

5.4.4 VESA bracket (6ACCMA11.0100-000)

Dimensions
Instructions
1. Mount the VESA bracket.
2. Tighten the M22 nut (Torque: 10 Nm).
3. Secure the bracket using the four screws (Torque: 1.3 Nm).
4. Secure the bracket now screwed to the panel with the corresponding four screws.
Instructions (securing the support)
1. Perform steps 1 to 3 of the instructions above.
2. Secure the bracket screwed to the panel to the swing arm with the corresponding four screws.
44
93
75
40
50
1
2
3
1 Power Panel FT50
2 VESA bracket
3 Swing arm example
Power Panel FT50 User's manual V1.19