Table of Contents
Advertisement
Securing the gooseneck bracket
1. First remove the protective cover from the PoE connection.
2. Move the gooseneck bracket up to the hole.
3. Feed the PoE cable through the hole.
4. Feed the end of the gooseneck bracket through the wall.
5. Feed the cable and the detached protective cover through the flat washer included in delivery.
6. Repeat step 5 with the nut.
7. Secure the Gooseneck holder using the nut.
Different viewing angles can be set using the gooseneck
bracket.
Notice!
The following limit values must be observed:
• Maximum number of flex cycles: 50,000
• Maximum bend radius of the supplied
PoE cable (for fixed installation):
8x cable diameter (6.3 mm)
• Maximum bending angle with a bend ra-
dius of 90 mm: 130°
Power Panel FT50 User's manual V1.19
Installation
47
Advertisement
Table of Contents
