ABB B&R FT50 User Manual page 57

Power panel
Table of Contents

Advertisement

Start mode Web
In start mode Web, a web browser that displays web server content is started immediately after restarting the
Power Panel.
In start mode Web, option Show boot logo additionally configures whether the boot logo and boot animation of the
system should be displayed while establishing the connection to the web server:
Startup
Network
Time
Screen
Boot logo or boot animation
For requirements and information about the boot logo and boot animation, see the following sections:
"Boot logo" on page 85
"Boot animation" on page 85
7.1.1.2 Service page Network
The default settings for service Network appear as follows:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Information:
Network configuration changes do not require the Power Panel to be rebooted and are applied by
the system and processed immediately after saving the settings and exiting the service pages (see
"Service page Save & Exit" on page
Hostname
Default setting: EMPTY (no hostname defined)
The Power Panel is identified in the network using its IP address or hostname. If a hostname is entered here, the
Power Panel can be identified in the network using this name, which allows it to be accessed (e.g. by Automation
Studio).
Important information:
• The hostname must be unique in the network.
• The name can have a maximum length of 64 characters.
DHCP
Default setting: Enabled
When the Dynamic Host Configuration Protocol (DHCP) is enabled, the network configuration is automatically
obtained from the DHCP server and assigned to the Power Panel; otherwise, it must be entered manually (e.g. IP
address of the device, IP address of the gateway, etc.).
For information about manual network configuration, see
Power Panel FT50 User's manual V1.19
Start mode
Specify the startup application
Show boot logo
Use boot logo / animation as web load screen
Hostname
Specify the name of the device on the
network
DHCP
Use automatic network configuration
Activate DNS
Activate DNS service
DNS suffix
Get DNS from DHCP server
79).
"Network configuration without DHCP" on page
Web
DnsSuffix
Configuration
60.
57

Advertisement

Table of Contents
loading

Table of Contents