ABB B&R FT50 User Manual page 78

Configuration
7.1.1.13 Service page OPC UA
The OPC UA server can be enabled/disabled on this service page:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
OPC UA server
Default setting: Disabled
If this setting is enabled, options Port and Identify token are available.
Either the hostname specified on service page Network or the IP address entered there must be used as the
address for the OPC UA server.
Notice!
The OPC UA server is stopped while the Power Panel service page is active.
Port
Default setting: 4840
The port number used to reach the OPC UA server of the Power Panel is specified here.
Identify token
Default setting: Anonymous
The following selections are available for option Identify token:
Anonymous The OPC UA server can be accessed within the network without authentication.
Username The OPC UA server can only be reached within the network by specifying the username and pass-
word.
Additional input fields are displayed if option Username is selected:
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
78
OPC UA server
OPC UA server port
Identify token
Choose the identify token type
Identify token
Choose the identify token type
User
Password
OPC UA server password
Max. 100 characters
Show password
✓
4840
Anonymous
4840
Username
●●●●●●●●
Power Panel FT50 User's manual V1.19