Table of Contents
Advertisement
Configuration
7.1.1.2.1 Network configuration without DHCP
The entire network configuration can be completed manually by disabling option DHCP:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Information:
The data required for manual network configuration can be obtained from the network or system ad-
ministrator.
Information:
IP addresses are checked for validity when they are entered. Only characters that build a valid IP
address can be entered.
If the IP address entered is incomplete or the network configuration is incorrect, error messages will
be output when starting up the device.
Hostname / DHCP / Activate DNS / DNS suffix
For a description of these options, see service page
IP address
Default setting: EMPTY
The IP address of the Power Panel within the network must be entered here.
Subnet mask / Default gateway
Default setting: EMPTY
Subnet mask and IP address of the default gateway.
Primary DNS server / Secondary DNS server / Tertiary DNS server
Default setting: EMPTY
The IP addresses for the DNS server.
This input option for the DNS server is only displayed if option Activate DNS is enabled.
60
Hostname
Specify the name of the device on the
network
DHCP
Use automatic network configuration
Activate DNS
Activate DNS service
DNS suffix
IP address
Subnet mask
Default gateway
Primary DNS server
Secondary DNS server
Tertiary DNS server
"Network" on page
DnsSuffix
57.
Power Panel FT50 User's manual V1.19
✓
Advertisement
Table of Contents
