Table of Contents
Advertisement
7.2 Update
Information:
It is important to note that a special accessory cable is necessary to be able to connect USB acces-
sories to the FT50 (see
In principle, it is possible to connect a USB hub. The operation of several USB devices is only possible
to a limited extent, however. It is important to connect only one USB flash drive. A mouse and keyboard
can be operated simultaneously.
When updating the Power Panel with a USB flash drive, it is important to note that the drive must have a capacity of
at least 256 MB. In addition, an industrial-grade USB flash drive must be used (see
7.2.1 Updating with Automation Studio and USB flash drive
1
Upgrade PPT Image in Automation Studio
1. Update the PPT image for the Power Panel in Automation Studio (upgrade).
2. Configure the Power Panel in Automation Studio according to requirements.
3. Connect a USB flash drive to the computer and select the following menu command in Automation Studio:
° Project / Project installation / Generate project installation package
The corresponding device (Power Panel) must be selected in the following selection dialog box. After con-
firming the selection, the target medium (connected USB flash drive) is selected and the process is started
using button [Download to application memory].
Power Panel FT50 User's manual V1.19
"FT50 PoE cable - M22/RJ45, USB" on page
33).
"Storage media" on page
Automation Studio
2
4
USB memory
5
Power Panel
Configuration
127).
3
81
Advertisement
Table of Contents
