ABB B&R FT50 User Manual page 109

7.3.4.2.3.4 LoadConfiguration
The Power Panel loads the last saved settings and restarts. Any changes made to the
and are lost.
Function identical to: Service page Save & Exit
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:MethodSet/4:LoadConfiguration
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:LoadConfiguration
Arguments for method call
Arguments -
7.3.4.2.3.5 SaveConfiguration
Saves changes made to the parameters. Method
on the Power Panel.
Function identical to: Service page Save & Exit
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:MethodSet/4:SaveConfiguration
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:SaveConfiguration
Arguments for method call
Arguments -
7.3.4.2.3.6 SetBrightness
Changes the screen brightness in the range 20% to 100%. See arguments for the method call.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:MethodSet/4:SetBrightness
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:SetBrightness
Arguments for method call
Argument Data type Name
0 UInt32 Brightness
7.3.4.2.3.7 SetBrightnessUnlimited
Changes the screen brightness in the range 0% to 100%. See arguments for the method call.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:MethodSet/4:SetBrightnessUnlimited
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:SetBrightnessUnlimited
Arguments for method call
Argument Data type Name
0 UInt32 BrightnessUnlimited
Power Panel FT50 User's manual V1.19
→ Exit without saving (button)
LoadConfiguration
→ Save changes (button)
Description
Brightness in percent [%].
Range of values: 0 - 100
Scaling 0 → 20% to 100 → 100%
Description
Brightness in percent [%]. Values >100 are limited to 100.
Range of values 0 - 100
Scaling No scaling: 0 → 0% to 100 → 100%
Configuration • Software • OPC UA server
parameters
must be used to enable these stored settings
are not saved
109