ABB B&R FT50 User Manual page 111

ConnectionWatchdogTimeout
This parameter defines the period for the watchdog timeout or disables the watchdog function.
The following values are valid for ConnectionWatchdogTimeout:
Value [ms] Description
0 This value immediately disables the watchdog.
500 to 10000 Timeout period in milliseconds.
The client must set parameter
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:ParameterSet/4:ConnectionWatchdogTimeout
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:ConnectionWatchdog/4:ConnectionWatchdogTimeout
Node attributes
NodeClass Variable
DataType UInt16
AccessLevel CurrentRead, CurrentWrite
UserAccessLevel
CurrentRead, CurrentWrite
ConnectionWatchdogTrigger
This parameter is used firstly to enable the watchdog and secondly to trigger it.
The following values are valid for ConnectionWatchdogTrigger:
Value Description
true If the watchdog is not active, the watchdog is started with the value from ConnectionWatchdogTimeout.
If the watchdog is active, the watchdog is restarted with the value from ConnectionWatchdogTimeout.
false No function.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:ParameterSet/4:ConnectionWatchdogTrigger
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/3:Control/4:ConnectionWatchdog/4:ConnectionWatchdogTrigger
Node attributes
NodeClass
Variable
DataType Boolean
AccessLevel CurrentRead, CurrentWrite
UserAccessLevel CurrentRead, CurrentWrite
Power Panel FT50 User's manual V1.19
ConnectionWatchdogTrigger to value "true" within the time defined here if the watchdog is active.
Configuration • Software • OPC UA server
111