Quality Certificates And Applicable Standards; Table 1-2 Standards That Are Referred To In This Document - ABB PCS6000 User Manual

1.10. Quality certificates and applicable standards

The following certificates and conformity declarations are available with ABB:
– ISO 9001 / ISO 14001 certificates stating that ABB has implemented and maintains a
management system which fulfills the requirements of the normative standards
– CE declaration of conformity
– EMC Test Certificate PCS6000 Montena_16602
– List of standards that the converter complies with (see "A01: Applicable standards &
conformity")
Table 1–2 Standards that are referred to in this document
Standard
ANSI Z535.6
DIN 55402-1
DIN 55474
EN 50110
IEC 60204-1
IEC 60721-3-1
IEC 60721-3-2
IEC 60721-3-3
ISO 3864-2
ISO 7010
ISO 13849-1
ISO 780
60228
IEC
EN 61000-6-2
EN 61000-6-4
IEC 61800-3
IEC 61000-5-2
PRODUCT
PCS6000
INTRODUCTION, TERMS, TRADEMARKS AND RELATED DOCUMENTS
Title
'American national standard for product safety information in product
manuals, instructions, and other collateral materials'
'Shipping marks for packages; pictorial marking for handling of goods'
'Auxiliary means of packaging - Desiccants in bag - Application, calculation of
the required number of desiccant units'
'European standard code for electrical work safety'
'Safety of machinery - Electrical equipment of machines - Part 1:
General requirements'
'Classification of environmental conditions: Classification of groups of
environmental parameters and their severities; Storage'
'Classification of environmental conditions: Classification of groups of
environmental parameters and their severities; Transportation'
'Classification of environmental conditions: Classification of groups of
environmental parameters and their severities - Stationary use at
weatherprotected locations'
2004 (E) - 'Graphical symbols – Safety colors and safety signs – Part 2: Design
principles for product safety labels'
2011 (E) - 'Graphical symbols - Safety colours and safety signs - Registered
safety signs'
'Safety of machinery - Safety-related parts of control systems - Part 1:
General principles for design, section 6.2.6 Category 3'
'Packaging - Pictorial marking for handling of goods'
2004 'Conductors of insulated cables'
'Electromagnetic Compatibility (EMC) generic standards - Immunity for
industrial environments'
'Electromagnetic Compatibility (EMC) generic standards - Emission
standards for industrial environments'
'Adjustable speed electrical power drive systems - Part 3: EMC requirements
and specific test methods, second edition 2004-08'
'Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation
guidelines - Section 2: Earthing and cabling'
DOCUMENT KIND
User manual
DOCUMENT ID.
3BHS600000 E40
REV. LANG. PAGE
G en 17/114