ABB B&R FT50 User Manual page 92

Configuration • Software • OPC UA server
7.3.4.1.4 MethodSet
All methods of the Power Panel are accessible under the following path:
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50/2:MethodSet
ns Path/Node
0 Root
0 Objects
2 DeviceSet
4 PowerPanelFT50
2 MethodSet
ns BrowseName of the method
4 AwakePanel
BuzzerDefault
BuzzerWithPara
LoadConfiguration
SaveConfiguration
SetBrightness
SetBrightnessUnlimited
SetTime
StartUpdate
7.3.4.1.5 Device properties
Device properties (product-specific information) of the Power Panel are located under the following path:
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelFT50
ns Path/Node
0 Root
0 Objects
2 DeviceSet
4 PowerPanelFT50
ns BrowseName of the information
3 CompatibilityId
2 DeviceManual
2 DeviceRevision
2 HardwareRevision
2 Manufacturer
2 Model
3 ProductCode
2 RevisionCounter
2 SerialNumber
2 SoftwareRevision
3 VendorId
7.3.4.1.6 Alternative paths of nodes
The nodes described in the previous sections can also be retrieved using other paths. This alternative structure
divides the nodes of ParameterSet,
description of the nodes in the following section is structured according to this logical structure.
92
Description
Root directory
Object directory
Device directory
Node for the "Power Panel " device
Node containing all methods of the device
Description
"Wakes up" the Power Panel when the screensaver is running.
Plays the buzzer with the system settings.
Plays the buzzer with the specified parameters.
The Power Panel loads the last saved settings and restarts. Any changes made to the
and are lost.
Saves changes made to the parameters. Method
on the Power Panel.
Changes the screen brightness in the range 20% to 100%.
Changes the screen brightness in the range 0% to 100%.
Sets the date and/or time of the device.
Reboots the Power Panel and starts the update process.
Description
Root directory
Object directory
Device directory
Nodes for the Power Panel
Description
ID to indicate compatibility.
Link to the website: The user's manual is located in the Downloads section.
Hardware revision of the device (e.g. C3).
Value: Empty string (string with length 0)
Hardware revision of the device (e.g. C3) is printed on the device.
Manufacturer of the device: B&R Industrial Automation GmbH
Order number of the device, e.g. 6PFT50.101E-10B.
B&R ID code (see technical data of the device).
Value: -1 (reserved, not in use)
Serial number of the device (see label on back of the device).
Software version of the PPT system: e.g. 1.2.0
Vendor ID for customized models.
MethodSet and Device properties
must be used to enable these stored settings
LoadConfiguration
into logical function groups. The detailed
Power Panel FT50 User's manual V1.19
parameters are not saved