6.1.2
Interface description
6.1.2.1
General information
This chapter describes only those interfaces in the cabinet unit that require additional
connection work by the customer. All other interfaces are pre-wired at the factory and are not
designed for customer connections.
Note
Additional information
All connections to be established on the plant side as well as the interfaces for integration
into the plant control system are described in the circuit diagrams and terminal diagrams on
the customer DVD supplied with the device.
6.1.2.2
Control Interface Module
Figure 6-4
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Control Interface Module
Cabinet Modules
6.1 Basic Line Connection Modules
145