Siemens SINAMICS S120 Manual page 180

Cabinet Modules
6.3 Motor Modules
Configuration
Motor Modules contain the following components as standard:
● Retaining device for the DC busbar, including the interface to the DC connections of the
Motor Module (the necessary DC busbar must be provided separately as option M80 to
M87).
● Connecting bar for the motor cables
● Cable propping bar for the electric power cables
● DRIVE-CLiQ interface (three DRIVE-CLiQ sockets), without Control Unit
● 4-pole auxiliary power supply, including terminal and cables for looping through to the
next Cabinet Module
● PE busbar (60 x 10 mm), including jumper for looping through to the next Cabinet
Module.
● EMC-compliant design thanks to additional shielding measures and appropriate laying of
cables.
Note
Additional information
The configuration examples of the individual Motor Modules illustrate the positioning of the
factory-fitted components. They show the maximum possible configuration of the modules,
which contain all options that can be ordered.
Refer to the layout diagrams (AO) on the customer DVD for the precise order-specific
location of the components.
178
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A