Installation steps
Installing is the same as removing, however in the reverse order.
NOTICE
Pay attention to the tightening torques
The tightening torques specified in the table "Tightening torques for screw connections"
must be observed.
The screw connections for the protective covers may only be tightened by hand.
Note
Establishing the system pressure
Establish the specified inner deionized water circuit system pressure.
7.5
Replacing components
7.5.1
General information
This chapter deals with replacing components that may need to be exchanged when the
cabinet units require maintenance or service. Other components are not normally subject to
wear and tear and are, therefore, not covered in this chapter.
Note
Additional information
The article numbers for spare/replacement parts are specified in the customer DVD in the list
of spare/replacement parts.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
Maintenance and servicing
7.5 Replacing components
245