M07, Cable-Marshalling Compartment 200 Mm High, Ral 7035 - Siemens SINAMICS S120 Manual

9.38

M07, cable-marshalling compartment 200 mm high, RAL 7035

Availability of option
This option is available for the following S120 Cabinet Modules:
● Basic Line Connection Modules
● Active Line Connection Modules
● Motor Modules
● Heat Exchanger Module
● Auxiliary Power Supply Modules
Description
Because it is raised 200 mm, the supplementary cable marshalling compartment made of
rigid sheet steel facilitates higher cable bending radii (cable is fed in from below) and cable
routing within the cable marshalling compartment.
The cable-marshalling compartment comes completely assembled and has color RAL 7035
as standard.
Note
The cable marshalling compartment increases the cabinet height by 200 mm.
Table 9- 64 Components of the cable marshalling compartment
Component
1 x cable marshalling compartment
element
Side shutters
(not shown)
for the cable marshalling compart-
ment
(option M26/M27 only).
Connection to the foundation
To connect the cable marshalling compartment to the foundation, four holes for M12 screws
are provided. These are in line with the holes in the cabinet. The fixing dimensions are
specified on the associated dimension drawings.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
9.38 M07, cable-marshalling compartment 200 mm high, RAL 7035
Connection element Fixing elements
On the cabinet:
The cabinet's cable marshalling compartment
is shipped pre-assembled.
On the foundation:
The holes are in line with the holes in the
cabinet (see dimension drawings).
Options
443