Siemens SINAMICS S120 Manual page 176

Cabinet Modules
6.2 Active Line Connection Modules
Article No.
PE/GND connection
- Busbar cross-section
- Connection cross-section, max. (IEC)
Cable length, max.
5)
- Shielded
- Unshielded
Degree of protection (standard version)
Dimensions (standard version)
- Width
- Height
- Depth
Weight (standard version)
Frame size
- Line Connection Module
- Active Interface Module
- Active Line Module
Rated short-circuit current acc. to IEC
Minimum short-circuit current
The base load current I
1)
300 s.
The specified power loss represents the maximum value at 100 % utilization. The value in normal operation is lower.
2)
This value applies to the water coolant option; for other coolant types, see Chapter "Coolant".
3)
Total sound pressure level of Active Interface Module and Active Line Module.
4)
Total of all motor cables and DC link. Longer cable lengths for specific configurations are available on request, see
5)
SINAMICS - Low-Voltage Configuration Manual on the customer DVD supplied with the device.
Minimum current required for reliable tripping of the protective devices.
6)
174
6SL3735-
mm
mm
m
m
mm
mm
mm
kg
kA
kA
6)
is based on a duty cycle of 150% for 60 s or I
H DC
7TG41-6LA3
2
2
2250
3375
IP21
1600
2200
600
1640
JL
JIL
JXL
100
3.2
max DC
PE busbar
600
240
for 5 s with a duty cycle duration of
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A