Maintenance and servicing
7.7 Environmental compatibility
Forming circuit for Motor Modules
Figure 7-30
Procedure
● The device being formed must not receive a switch-on command (e.g. from the keyboard
or terminal block).
● Connect the appropriate forming circuit.
● Forming has been completed if the DC link voltage no longer rises.
7.7
Environmental compatibility
For environmentally friendly recycling and disposal of your old device, please contact a
company certified for the disposal of old electrical and electronic devices and dispose of the
device in accordance with the regulations in your country.
306
Forming circuit for Motor Modules
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A