Siemens SINAMICS S120 Manual page 203

Article No.
Volume of liquid
- degree of protection <IP55
- degree of protection IP55
Cooling air requirement (degree of protection
<IP55)
Sound pressure level L
pA
Motor connection U2, V2, W2
- Screws
- Connection cross-section, max. (IEC)
Cable length, max.
7)
- shielded
- unshielded
PE/GND connection
- busbar cross-section
- connection cross-section, max. (IEC)
Degree of protection (standard version)
Dimensions (standard version)
- width
- height
- depth
Weight, approx. (standard version)
Frame size
Rated short-circuit current acc. to IEC
Rated output of a typ. 6-pole standard induction motor based on I
1)
Rated power of a typ. 6-pole standard induction motor based on I
2)
The base load current I
3)
The base load current I
4)
The specified power loss represents the maximum value at 100 % utilization. The value in normal operation is lower.
5)
This value applies to the water coolant option; for other coolant types, see Chapter "Coolant".
6)
Total of all motor cables. Longer cable lengths for specific configurations are available on request, see SINAMICS - Low
7)
Voltage Configuration Manual on the customer DVD supplied with the device.
Additional load cycle for output frequencies from 5 Hz to 10 Hz: Base load current = 1460 A, short-time current = 2340 A
8)
for 5 s with a duty cycle duration of 600 s. For output frequencies from 1 Hz to 5 Hz, the short-time current is 1900 A for
5 s.
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
6SL3725-
dm³
dm³
m
(1 m) at 50/60 Hz dB(A)
mm
m
m
mm
mm
mm
mm
mm
kg
kA
is based on a duty cycle of 110% for 60 s or 150% for 10 s with a duty cycle duration of 300 s.
L
is based on a duty cycle of 150% for 60 s or 160% for 10 s with a duty cycle duration of 300 s.
H
1TG41-
6AP3
8)
5.2
7.0
/s 0.136
3
56
2/M12
4 x 240
2
300
450
2
2
IP21
600
2200
600
480
JXL
100
or I at 3 AC 50 Hz 500 V or 690 V.
L H
or I at 3 AC 60 Hz 575 V.
L H
Cabinet Modules
6.3 Motor Modules
PE busbar
600
240
201