K48, Sensor Module Cabinet-Mounted Smc20; General Information - Siemens SINAMICS S120 Manual

Cabinet modules liquid cooled

Hide thumbs Also See for SINAMICS S120:

Table of Contents

K48, Sensor Module Cabinet-Mounted SMC20

Availability of option

This option is available for the following S120 Cabinet Modules:

● Motor Modules

The SMC20 Sensor Module is used to simultaneously record the speed and position. The

signals emitted by the incremental encoder are converted here and made available to the

closed-loop controller via the DRIVE-CLiQ interface for evaluation purposes.

The following encoders can be connected to the SMC20 Sensor Module:

● Incremental encoder sin/cos 1 V

● EnDat absolute encoder

● SSI encoder with incremental signals sin/cos 1 V

The motor temperature can also be detected using KTY84-130 temperature sensors or PTC

thermistors.

The maximum encoder cable length is 100 m.

Cabinet Modules liquid cooled

Equipment Manual, 04/2020, A5E37067587A

9.13 K48, Sensor Module Cabinet-Mounted SMC20