Coolant Connections; Overview Of Connections - Siemens SINAMICS S120 Manual

Cabinet Modules
6.4 Heat Exchanger Modules
6.4.4

Coolant connections

6.4.4.1

Overview of connections

The cooling connections for the Heat Exchanger Module are shown in the following diagram.
Note
The raw water circuit on the plant side shown is implemented according to option W20 (raw
water connection from below).
The converter-side deionized water circuit shown is implemented according to option W36
(Heat Exchanger Module for installation on the right).
Figure 6-28
216
Heat Exchanger Module - coolant connections (using option W20, cooling water
connection from below and option W36, Heat Exchanger Module for installation on the
right)
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A