Leds On The Smc10 Sensor Module; Leds On The Smc20 Sensor Module - Siemens SINAMICS S120 Manual

8.9

LEDs on the SMC10 Sensor Module

Table 8- 17 Meaning of the LEDs on the SMC10 Sensor Module
LED Color
RDY ---
(READY)
Green
Orange
Red
Green/red
Green/
orange or
red/orange
8.10

LEDs on the SMC20 Sensor Module

Table 8- 18 Meaning of the LEDs on the SMC20 Sensor Module
LED Color
RDY ---
(READY)
Green
Orange
Red
Green/red
Green/
orange or
red/orange
Cabinet Modules liquid cooled
Equipment Manual, 04/2020, A5E37067587A
State Description
Off The electronics power supply is missing or outside the permissible tolerance range.
Steady light The component is ready for operation and cyclic DRIVE-CLiQ communication is
taking place.
Steady light DRIVE-CLiQ communication is being established.
Steady light This component has at least one fault.
Remark:
The LED is activated irrespective of whether the corresponding messages have
been reconfigured.
Flashing 0.5 Firmware is being downloaded.
Hz
2 Hz flash- Firmware download is complete. Waiting for POWER ON.
ing light
2 Hz flash- Detection of the components via LED is activated (p0144).
ing light Remark:
Both options depend on the LED status when module recognition is activated via
p0144 = 1.
State Description
Off The electronics power supply is missing or outside the permissible tolerance range.
Steady light The component is ready for operation and cyclic DRIVE-CLiQ communication is
taking place.
Steady light DRIVE-CLiQ communication is being established.
Steady light This component has at least one fault.
Remark:
The LED is activated irrespective of whether the corresponding messages have
been reconfigured.
Flashing 0.5 Firmware is being downloaded.
Hz
2 Hz flash- Firmware download is complete. Waiting for POWER ON.
ing light
2 Hz flash- Detection of the components via LED is activated (p0144).
ing light Remark:
Both options depend on the LED status when module recognition is activated via
p0144 = 1.
8.9 LEDs on the SMC10 Sensor Module
Diagnostics
319