Signode Little David LD16AE 2.0 Operator's Manual page 77

Exploded Drawings For Ordering Spare Parts
The following drawings represent several different models of the CAC60/60
series cartridges. Please read carefully to ensure the correct part number is
chosen before ordering spare parts.
Explanation Of Parts List:
Each drawing contains a table with a parts list. The item numbers
represent the corresponding balloon call outs on the drawings. Some of the
drawings have two tables. One for a 2" wide tape cartridge and one for a 3" wide
tape cartridge. Each table has a column for a stainless steel suffix , "SS" and a
mirror image suffix, "MI". Any of the parts that have a suffix indicated in their
row require the suffix to be added to the end of the part number for a stainless
steel and/or mirror image cartridge.
Example 1:
Refer to Table 1 for the following example. If you wanted to order a, "Link Bar",
for your stainless steel cartridge. Find the part in the corresponding table. The
part number for a standard carbon steel cartridge is, "CAC60‐0007‐5". The
cartridge your ordering is stainless steel. Check the column under the heading,
"SS". If a, "SS", is in the row for the part you are ordering, than "SS" must be
added to the end of the part number. In this example "SS" is indicated in the row
for the, "Link Bar". So the part number would be as follows. "CAC60‐0007‐5SS"
Example 2: