Advertisement
Advertisement
Table of Contents
Related Manuals for Signode RCD-1431
Summary of Contents for Signode RCD-1431
- Page 1 RCD-1431/3431 MANUALS SEALERS...
-
Page 2: General Safety Considerations
2. TRAINING. This tool must not be used by persons not properly trained in its use. Be certain that you receive proper training from your employer. If you have any questions contact your Signode Representative. 3. EYE INJURY HAZARD. -
Page 3: Cutting Tensioned Strap
Use the correct Signode products for your application. If you need help contact your Signode Representative. Signode tools and machines are designed and warranted to work together with Signode strapping and seals. Use of non-Signode strap, seals and/or manufactured or specified replacement parts may result in strap breakage or joint separation while applying strapping to a load or during normal shipping and handling. -
Page 4: Tool Specifications
General Safety Instructions Signode tools and machines are designed and warranted to work Specifications together with Signode strapping and seals. Use of non-Signode strap, seals Operating Instructions and/or manufactured or specified replacement parts may result in strap Parts List breakage or joint separation while applying strapping to a load or during normal shipping and handling. -
Page 5: Tool Maintenance
OPERATING INSTRUCTIONS Wear safety glasses which conform to ANSI Standard Z87.1 or EN 166. Stand to one side of the tensioned strap while sealing. Maintain proper footing and balance. Make sure all bystanders are clear before proceeding. 1. Fully open sealer handles and center the JOINT INSPECTION open jaws on the seal. - Page 6 Signode reserves the right to replace any tool which proves not to operate per functional specifications with a new or like-new tool of the same model if in Signode's judgement such replacement is appropriate. Any new replacement tool provided to an owner will carry a full sixty (60) day warranty. Any warranty repaired tool or like-new replacement tool will carry a warranty for the balance of the time remaining on the initial sixty (60) day warranty.
Need help?
Do you have a question about the RCD-1431 and is the answer not in the manual?
Questions and answers