Novell Netware - Adaptec PM1564U3 Install Manual

Novell NetWare

You must follow the procedures in the following sections to installing a
SmartRAID VI controller for Novell NetWare, especially as a booting
controller. There are specific steps that must be completed to ensure that
NetWare will recognize the DPT controller and any attached devices.
The DPT diskette for NetWare contains the device drivers you need to
install a DPT controller for NetWare 5.0. The diskette also contains
additional modules that allow you to monitor and configure a NetWare
server using Storage Manager on a remote client workstation.
If you are using NetWare 4.11 or 4.2, you must download the installation
files from the DPT Technical Support web site.
NOTE The I2O drivers in the following Novell Support Packs or
driver kits will result in unexpected behavior of the SmartRAID
VI controller or disk arrays:
If any of these Support Packs or updates are applied, use the
Novell install procedure to update the drivers with the files
from your DPT NetWare diskette.
After you have installed the I
NetWare procedures for modifying disk partitions, hot fixes, or volume
maintenance.
You can use SMOR to create or modify disk arrays or add Hot Spare
drives. If you install remote communication support for Storage
Manager, you can use Storage Manager from a client workstation to
manage the storage subsystem.
The DPT diskette for NetWare only contains the device drivers
NOTE
for NetWare 5.0. If you are using NetWare 4.11 or 4.2, you must
download the installation files from the Technical Support area
of the DPT web site (www.dpt.com).
Software Installation
I2ODRV3
NetWare 5 Support Pack 2
NetWare 5 Support Pack 2A
O drivers you can now use the normal
2
51