Table of Contents
Advertisement
C
H A P T E R
Configuration and
Installation
Your new DPT SmartRAID VI controller
is the center of a complete system
consisting of the controller, disk drives
and other peripherals, and the
connecting cables. This chapter
discusses configuring these components.
Most DPT controllers come with options
already installed. You may not need to
perform every procedure in this chapter.
3
Configure Devices
Prepare your SCSI peripherals for
use by setting their SCSI IDs and
termination.
Attach Modules
Assemble the various parts of your
DPT controller, which can include
the base controller, a RAID
Accelerator, Bus Expansion Module
and one or more memory modules.
Install in your System
Mount the assembled controller in
your computer system.
Configure the Software
Use the Storage Manager on ROM
(SMOR) utility to set your system
parameters and create arrays. Then
install the operating system and
your system is ready for use.
19
Advertisement
Table of Contents
