Installing The Software Driver For Novell Netware - Adaptec AAA-130U2 Installation And Hardware Manual

Installing the Software
Driver for Novell NetWare
In this Chapter
Installing the Array1000U2 Driver for Novell NetWare 5-2
Netware Installation and Configuration Notes
This chapter explains how to install the AAA-131U2/133U2 soft-
ware driver ( cda1000h.ham ) for Novell NetWare (NetWare 4.11, 4.2,
and 5.0). Before installing the driver, make sure you have completed
the following:
Installed the AAA-131U2/133U2 in your system
(See Chapter 2)
Created the first array using the ARRAYCONFIG U2 utility, if
you plan to boot from an array. (See Chapter 3)
Once NetWare and the driver are installed, install Adaptec CI/O
Management Software from the server console (CI/O is required for
array management in order to provide the proper level of fault
tolerance and event notification). Refer to the Adaptec CI/O Manage-
ment Software User's Guide for instructions on installing and using the
software.
è
5-8
5-1