Adaptec PM2865U3 Specifications

High Performance Ultra160 SCSI RAID Controller
Up to 160MB/s data transfer rate
64-bit, 33MHz PCI host interface
Intel® i960® RN 80 MIPS I/O processor for high performance
Integrated hardware RAID 0, 1, 5, 0+1 and 0+5
Supports Microsoft® Cluster Server (MSCS)
Up to 128MB cache memory
Data protection via optional cache battery backup
Features:
• Includes 32MB ECC cache, upgradable to 128MB
• Fully I O® compliant
2
• Up to 160MB/s data transfer rate
• Controls SCSI-1, SCSI-2 and SCSI-3 devices
• Controls Ultra160, Ultra2, Ultra, and Fast SCSI devices
• Controls up to 15 SCSI devices per channel
• Low Voltage Differential (LVD) technology for up to
12 meter SCSI cable length
• Integrated hardware RAID 0, 1, 5, 0+1 and 0+5
• 2 DIMM sockets support up to 128MB of controller
cache memory (DPT or industry-standard 144-pin
ECC SDRAM SO-DIMMs)
• Expansion Modules add 1 or 2 additional Ultra160 SCSI channels
• PCI 2.2 compliant
• Intel i960 RN I/O processor for ultra-low host CPU utilization
Century
PM2865U3
Available with one, two, three or four
Ultra160 SCSI Channels
• Dedicated SCSI RISC processor for maximum
SCSI performance
• Audible disk drive failure alarm
• Very high-density (VHDCI) external SCSI connector
allows 4 external SCSI channels from 1 slot
• Flash-upgradable firmware and BIOS
• Supports SAF-TE and SES for storage cabinet
status monitoring
• Supports Microsoft Cluster Server (MSCS)
• Dynamic Array Expansion permits drives to be added
on-the-fly to existing arrays
• Easy-to-use GUI storage management software
• BIOS-based device setup and RAID configuration utility
• Command Line Interface (CLI) utility for device
status and configuration