Arcconf Commands; Arcconf Atapassword; Arcconf Copyback - Adaptec 51245 User Manual

ARCCONF Commands

Perform the following functions from the command line:
atapassword
copyback
create
datascrub
delete
driverupdate
failover
getconfig
In the online command syntax, <> indicates a required parameter and [] indicates an
Note:
optional parameter.

arcconf atapassword

Sets or clears the Secure Erase password for SATA drives. See
information about Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password|current password is the case-senstive password string.
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each
drive on which to set or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1

arcconf copyback

Enables or disables the copyback feature, which attempts to keep drives in the original slot
order after rebuilds.
Syntax
ARCCONF COPYBACK <Controller#> <ON|OFF>
Parameters
Controller# is the controller number
On enables the copyback feature
Off disables the copyback feature
Chapter 2: Using the Command Line Utility
ARCCONF COMMANDS
getlogs rescan
getsmartstats resetstatisticscounters
getstatus romupdate
getversion savesupportarchive
identify setalarm
imageupdate setcache
key setconfig
modify setmaxiqcache
setname
setncq
setperform
setpower
setpriority
setstate
setstatsdatacollection
task
arcconf task on page 27 for more
12
●