Using The Command Line Utility; Arcconf Commands; Arcconf Atapassword; Arcconf Copyback - Adaptec Command Line Utility User Manual

ARCCONF Commands

Perform the following functions from the command line:
atapassword
copyback
create
datascrub
delete
driverupdate
failover
getconfig
getlogs
In the online command syntax, <> indicates a required parameter and [] indicates an
Note:
optional parameter.

arcconf atapassword

Sets or clears the Secure Erase password for SATA drives. See
information about Secure Erase.
Syntax
ARCCONF ATAPASSWORD <Controller#> SET <new password> <Channel# ID#> ...
ARCCONF ATAPASSWORD <Controller#> CLEAR <current password> <Channel# ID#> ...
Parameters
new password|current password is the case-senstive password string.
Channel/ID lists the space-delimited channel number and device number (ID) pairs for each
drive on which to set or clear the password.
Examples
ARCCONF ATAPASSWORD 1 SET uR8ryx 0 1
ARCCONF ATAPASSWORD 1 CLEAR uR8ryx 0 1

arcconf copyback

Enables or disables the copyback feature, which attempts to keep drives in the original slot
order after rebuilds.
Syntax
ARCCONF COPYBACK <Controller#> <ON|OFF>
Parameters
Controller# is the controller number
On enables the copyback feature
Off disables the copyback feature
Chapter 2: Using the Command Line Utility
ARCCONF COMMANDS
getsmartstats resetstatisticscounters
getstatus romupdate
getversion saveconfig
identify savesupportarchive
imageupdate setalarm
key setcache
modify setconfig
playconfig setmaxiqcache
rescan setname
setncq
setperform
setpower
setpriority
setstate
setstatsdatacollection
task
arcconf task on page 30 for more
14
●