Table of Contents
Advertisement
The Windows components can be installed directly from the
CD-ROM or a from a disk you create from the CD-ROM. The
components are as follows:
Adaptec event logger
I
SNMP event logger extensions
I
Adaptec SNMP subagent
I
Adaptec MIB
I
System Requirements
The Adaptec SNMP software supports all Adaptec RAID controllers
and has the following system requirements:
The TCP/IP network protocol must be enabled on your
I
system. Refer to your operating system documentation for
information about installing the TCP/IP protocol.
The SNMP service for your operating system must be
I
installed.
Management Consoles
The Adaptec SNMP agent conforms to the SNMP Version 1
specification. Adaptec has developed and tested this feature to work
with various operating systems that provide built-in SNMP
capability.
Windows supports controller management from an SNMP
management console.
Installing Adaptec SNMP Support
The following topics describe how to install Adaptec SNMP
software and SNMP support for Windows.
Note: Ensure that your operating system has SNMP support
enabled before installing the Adaptec SNMP software.
SNMP
A-6
Advertisement
Table of Contents
