Service - B&R Power Panel T80 User Manual

6.1.10 Service page Storage
On this service page, Power Panel memory can be shared to allow access from the network. The following memory
areas can be shared for network access:
• Connected USB storage media
• Internal user memory
Sharing takes place using the Common Internet File System (CIFS) protocol. In this case, the Power Panel functions
as a server and makes resources (a memory area) available to a client in the network using an access mechanism.
CIFS uses a user, password and memory for authentication.
The client will require the following information to access the memory area shared on the Power Panel:
CIFS user The CIFS user cannot be configured. "ppt80-user" must always be used as the CIFS user.
CIFS password
The password configured on this service page is used.
CIFS memory location The following names can be used to specify the memory location:
Name
usbshare
usbshare2
usershare
The USB storage medium must be formatted using the FAT32 file system.
The following figure shows the default settings for service page Storage:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Allow access to USB memory via network
Default setting: Disabled
If this option is enabled, access to the connected USB storage medium will be shared on the network.
Allow access to user memory via network
Default setting: Disabled
If this option is enabled, access to the internal user memory will be shared on the network.
Password for network access
Default setting: EMPTY (no password entered)
Input range: Max. 100 characters
The CIFS password for network sharing is configured here. This password applies both for sharing the USB storage
medium as well as internal user memory.
The password is stored on the device in configuration file PPT80Config.xml .
Power Panel T80 User's manual V1.03
Note: The username is device-specific. This is important to note if a device is replaced by a Power
Panel from another family(e.g. T50 ► T80).
Description
USB storage medium connected to USB interface IF3.
USB storage medium connected to USB interface IF4.
Internal user memory (flash) on the Power Panel.
Allow access to USB memory via network
Allow access to user memory via network
Password for network access
Max. 100 characters
Show password
Encrypt password
Save storage password in encrypted form
●●●●●●●●
Configuration
57