B&R Power Panel T80 User Manual page 43

If this option is disabled, the device can only be accessed using an IP address assigned by the DHCP. Options
DNS suffix and Get DNS from DHCP server are not available in this case and will be hidden:
Startup
Network
Time
Screen
Audio
Gesture
VNC
DNS suffix
Default setting: DnsSuffix
A DNS suffix is usually entered when a hostname is defined. The DNS suffix is specific to the network in which the
device is being operated. Information about this must be obtained from the network administrator.
The hostname and the DNS suffix make up the full domain name (FQDN: fully qualified domain name) for the
device:
hostname.dns-suffix
The full domain name could look like this, for example:
Hostname:
DNS suffix:
Fully qualified hostname (FQDN):
Get DNS from DHCP server
Default setting: Enabled
By default, the IP addresses for the DNS server are automatically obtained from the DHCP server.
If it is necessary to manually enter the IP addresses for the DNS server (without generally disabling DHCP), this
can be done by disabling the option Get DNS from DHCP server:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Primary DNS server / Secondary DNS server / Tertiary DNS server
Default setting: EMPTY
The IP addresses for the DNS server.
This input option for the DNS server is only displayed if option Activate DNS is enabled.
Power Panel T80 User's manual V1.03
Hostname
Specify the name of the device on the
network
DHCP
Use automatic network configuration
Activate DNS
Activate DNS service
ppt-visualization-machine-01
network-domain.com
ppt-visualization-machine-01.network-domain.com
Hostname
Specify the name of the device on the
network
DHCP
Use automatic network configuration
Activate DNS
Activate DNS service
DNS suffix
Get DNS from DHCP server
Primary DNS server
Secondary DNS server
Tertiary DNS server
✓
✓
✓
DnsSuffix
Configuration
43