Software
7.5.2.2.3
BuzzerWithPara
Plays the buzzer with the specified parameters. See arguments for the method call.
Information:
The Buzzer is not supported with older hardware revisions of the Power Panel. This method has no
effect in this case.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/2:MethodSet/4:BuzzerWithPara
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control/4:BuzzerWithPara
Arguments for method call
Argument
Data type
Name
0
UInt32
Frequency
1
UInt32
Duration
7.5.2.2.4
LoadConfiguration
The Power Panel loads the last saved settings and restarts. Any changes made to the
and are lost.
Function identical to:
Service page Save & Exit
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/2:MethodSet/4:LoadConfiguration
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control/4:LoadConfiguration
Arguments for method call
Arguments
-
7.5.2.2.5
SaveConfiguration
Saves changes made to the parameters. Method
on the Power Panel.
Function identical to:
Service page Save & Exit
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/2:MethodSet/4:SaveConfiguration
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control/4:SaveConfiguration
Arguments for method call
Arguments
-
96
Description
Frequency of the buzzer in hertz [Hz].
Duration of the buzzer in milliseconds [ms].
→
Exit without saving (button)
LoadConfiguration
→
Save changes (button)
parameters
must be used to enable these stored settings
Power Panel T80 User's manual V1.03
are not saved