B&R Power Panel T80 User Manual page 63

6.1.11.1.3 Configuring an update server of type HTTP
If option Get update server from DHCP server is disabled and update server type HTTP is selected, the following
additional input fields are displayed:
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
URL
Default setting: EMPTY (no update server entered)
To be able to update the Power Panel from an HTTP server (web server), a valid URL (hostname or IP address
and, if necessary, corresponding path) must be entered where the update files are stored.
The FTP connection is generally established via standard port 80 on the HTTP server.
Syntax of URL: [http://]update server[:port][/path/to/update-files]
URL fragment Description
Optional specification of the HTTP protocol.
http://
update-server Either the hostname or IP address of the update server to which a connection should be established is specified here.
:port Optional specification of the port used to access the HTTP server.
/path/to/update-files Specification of the path where the update files are stored.
Valid URL examples:
URL with hostname
webserver/
webserver/terminal/os-update
http://server-werk3/term-updates
http://server-werk2:8080/terminal-os
Information:
If the entered IP address is incomplete or no HTTP server exists for the IP address or entered hostname,
a message will be output that no network connection could be established if a connection attempt fails
during the update process.
Power Panel T80 User's manual V1.03
Load boot logo / animation
Press to load boot logo / animation from a USB flash drive
Update server type
Specify the update server type
Get update server from DHCP server
URL
URL with IP address
123.234.345.64/
123.234.345.64/terminal/os-update
http://10.11.12.13/term-updates
http://123.234.345.64:1234/terminal-os
Configuration
HTTP
63