Table of Contents
Advertisement
Accessories
9.2 0TB6102 2-pin power supply connector
This 1-row 2-pin terminal block is used to connect the power supply.
9.2.1 Order data
Model number
0TB6102.2010-01
0TB6102.2110-01
9.2.2 Technical data
Information:
The following specified characteristic data, features and limit values are only valid for this accessory
and may differ from those of the complete system. The data specified for the complete system applies
to the complete system in which this accessory is installed, for example.
The technical data in this manual is current as of its creation/publication. Subject to change without
notice.
Model number
Terminal block
Number of pins
Type of terminal block
Cable type
Pitch
Connection cross section
AWG wire
Wire end sleeves with plastic covering
With wire end sleeves
Flexible
Inflexible
Tightening torque
Electrical properties
Nominal voltage
Nominal current
1)
1)
The limit data for each Power Panel must be taken into account.
108
Short description
Terminal blocks
Accessory terminal block, 2-pin (3.81), screw clamp terminal block 1.5 mm²
Accessory terminal block, 2-pin (3.81), cage clamp terminal block 1.5 mm²
Table 3: 0TB6102.2010-01, 0TB6102.2110-01 - Order data
0TB6102.2010-01
Screw clamp terminal block variant
0.22 to 0.25 Nm
Table 4: 0TB6102.2010-01, 0TB6102.2110-01 - Technical data
2 (female)
Cage clamp terminal block variant
Only copper wires (no aluminum wires!)
3.81 mm
28 to 16
0.25 to 0.5 mm²
0.25 to 1.5 mm²
0.14 to 1.5 mm²
0.14 to 1.5 mm²
300 V
8 A
Power Panel T80 User's manual V1.03
0TB6102.2110-01
-
Advertisement
Table of Contents
