B&R Power Panel T80 User Manual page 95

7.5.2.2 Control
Path to the object directory:
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control
ns BrowseName of the method
4 AwakePanel
BuzzerDefault
BuzzerWithPara
LoadConfiguration
SaveConfiguration
SetBrightness
SetBrightnessUnlimited
SetTime
StartUpdate
7.5.2.2.1 AwakePanel
"Wakes up" the Power Panel when the screensaver is running.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/2:MethodSet/4:AwakePanel
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control/4:AwakePanel
Arguments for method call
Arguments -
7.5.2.2.2 BuzzerDefault
Plays the buzzer with the system settings.
Information:
The Buzzer is not supported with older hardware revisions of the Power Panel. This method has no
effect in this case.
Path to the node (BrowsePath)
Path:
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/2:MethodSet/4:BuzzerDefault
Alternative path (function group):
0:Root/0:Objects/2:DeviceSet/4:PowerPanelT80/3:Control/4:BuzzerDefault
Arguments for method call
Arguments -
Power Panel T80 User's manual V1.03
Description
"Wakes up" the Power Panel when the screensaver is running.
Plays the buzzer with the system settings.
Plays the buzzer with the specified parameters.
The Power Panel loads the last saved settings and restarts. Any changes made to the
and are lost.
Saves changes made to the parameters. Method
on the Power Panel.
Changes the screen brightness in the range 20% to 100%.
Changes the screen brightness in the range 0% to 100%.
Sets the date and/or time of the device.
Reboots the Power Panel and starts the update process.
must be used to enable these stored settings
LoadConfiguration
Software
parameters are not saved
95