Table of Contents
Advertisement
10.2.1 Overview of standards
Standard
Description
EN 55011
Industrial, scientific and medical equipment - Radio frequency disturbance characteristics - Limits and methods
(CISPR 11)
of measurement
EN 55016-2-1
Specification for radio disturbance and immunity measuring apparatus and methods
(CISPR 16-2-1)
- Part 2-1: Methods of measurement of disturbances and immunity - Conducted disturbance measurements
EN 55016-2-3
Specification for radio disturbance and immunity measuring apparatus and methods
(CISPR 16-2-3)
- Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
EN 55022
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
(CISPR 22)
Environmental testing
EN 60068-2-6
- Part 2-6: Procedures - Test Fc: Vibration (sinusoidal)
Environmental testing
EN 60068-2-27
- Part 2-27: Tests - Test Ea and guidance: Shock
Environmental testing
EN 60068-2-31
1)
- Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens
EN 60529
Degrees of protection provided by enclosures (IP code)
Insulation coordination for equipment within low-voltage systems
EN 60664-1
- Part 1: Principles, requirements and tests
Classification of ambient conditions
EN 60721-3-2
- Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transport
Classification of ambient conditions
EN 60721-3-3
- Part 3: Classification of groups of environmental parameters and their severities - Section 3: Stationary use at
weather-protected locations
Electromagnetic compatibility (EMC)
EN 61000-4-2
- Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test
Electromagnetic compatibility (EMC)
EN 61000-4-3
- Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
Electromagnetic compatibility (EMC)
EN 61000-4-4
- Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
Electromagnetic compatibility (EMC)
EN 61000-4-5
- Part 4-5: Testing and measuring techniques - Surge immunity test
Electromagnetic compatibility (EMC)
EN 61000-4-6
- Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-fre-
quency fields
Electromagnetic compatibility (EMC)
EN 61000-4-8
- Part 4-8: Testing and measuring techniques - Power frequency magnetic field immunity test
Electromagnetic compatibility (EMC)
EN 61000-4-11
- Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations im-
munity tests
Electromagnetic compatibility (EMC)
EN 61000-4-29
- Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on
DC input power port immunity tests
Electromagnetic compatibility (EMC)
EN 61000-6-2
- Part 6-2: Generic standards - Immunity standard for industrial environments
Electromagnetic compatibility (EMC)
EN 61000-6-4
- Part 6-4: Generic standards - Emission standard for industrial environments
Programmable logic controllers
EN 61131-2
- Part 2: Equipment requirements and tests
1)
Replacement for EN 60068-2-32
Power Panel T80 User's manual V1.03
International and national certifications
113
Advertisement
Table of Contents
