Service - B&R Power Panel T80 User Manual

6.1.2 Service page Startup
Startup
Network
Time
The start mode is configured on service page Startup and determines how the Power Panel behaves after being
switched on. The Power Panel is started in one of the following modes (Start mode) in accordance with this setting:
• Service page (default setting)
• VNC
• Web
Start mode Service page
This setting is typically used during the development phase of an application because the service page is opened
immediately after every Power Panel restart.
Start mode VNC
In this start mode, the Power Panel is started as a VNC client in order to display an HMI application made available
on a VNC server.
In start mode VNC, option Show boot logo additionally configures whether the boot logo and boot animation of the
system should be displayed while establishing the connection to the VNC server:
Startup
Network
Time
Screen
Start mode Web
In start mode Web, a web browser that displays web server content is started immediately after restarting the
Power Panel.
In start mode Web, option Show boot logo additionally configures whether the boot logo and boot animation of the
system should be displayed while establishing the connection to the web server:
Startup
Network
Time
Screen
Boot logo or boot animation
For requirements and information about the boot logo and boot animation, see the following sections:
• "Boot logo" on page 74
• "Boot animation" on page 74
Power Panel T80 User's manual V1.03
Start mode
Specify the startup application
(default setting)
Start mode
Specify the startup application
Show boot logo
Use boot logo / animation as VNC load screen
Start mode
Specify the startup application
Show boot logo
Use boot logo / animation as web load screen
Configuration
Service page
VNC
Web
41