Boot Logo; Boot Animation; Access To Shared Memory Areas - B&R Power Panel T80 User Manual

Software

7.2.3 Boot logo

Filename: PPTLogo.bmp.gz
The boot logo is displayed during the startup phase of the Power Panel.
If configured on service page Startup, the boot logo is also displayed in web/VNC mode while establishing the
connection.
The boot logo must meet the following requirements:
File format Only file format BMP (Windows bitmap) is permitted for the boot logo.
Size The size of the graphic must correspond to the size of the display in full screen mode.
To determine the size of the display on the Power Panel being used, see section "Technical data".
Name PPTLogo.bmp.gz
The boot logo must be compressed in GZ format (GNU ZIP file).
If the boot logo (any name possible) is added in Automation Studio and then the data for the USB
flash drive is generated, then Automation Studio will compress the boot logo into the GZ format and
name the file accordingly.
The user only has to make sure that the boot logo is compressed into the GZ format and the file is
named accordingly if Automation Studio is not being used.
Color depth The color depth is limited to 24-bit.

7.2.4 Boot animation

Filename: PPTLogoA.gif
If configured on service page Startup, the boot animation is displayed in web or VNC mode while establishing the
connection.
The boot animation must meet the following requirements:
File format Only file format GIF (Graphics Interchange Format) is permitted for the boot animation.
Size The size of the boot animation is not permitted to exceed the size of the used display in full screen
mode.
Name
PPTLogoA.gif
If the boot animation (any name possible) is added in Automation Studio and then the data for the
USB flash drive is generated, then Automation Studio will name the file accordingly.
The user only has to make sure that the boot animation is named accordingly if Automation Studio
is not being used. It is important to ensure that capitalization matches the name specified above!
Position
When specifying the position of the boot animation (see service page
important to make sure that the entire boot animation can still be shown on the display.
Application The boot animation is superimposed over an existing static boot logo.
The boot animation is only displayed when starting web or VNC mode. It is not displayed while the
device is booting.

7.3 Access to shared memory areas

The FileIO library (description see Automation Help) can be used to access shared memory areas (USB memory
or internal memory).
74
"Screen" on page 46), it is
Power Panel T80 User's manual V1.03