Service - B&R Power Panel T80 User Manual

6.1.9 Service page Web
The Power Panel can be configured as a web client on this service page. In this case, a web browser is operated in
full screen mode and an HMI application or other application running on a web server (e.g. mapp View) is displayed
in the browser.
The following features are not supported:
• Java
• Flash
The web browser provides full JavaScript support!
The following figure shows service page Web with the default settings:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Server
Default setting: EMPTY (no server entered or selected)
In order to use the Power Panel as a web client, a hostname or IP address for the web server must be specified.
It is possible here to enter multiple servers in a list. Entering the hostname or IP address and then clicking on the
[+] icon) adds the specified server in the list at the end of this services page (see "webserver1" and "webserver2"
in the previous image).
To use a specific web server from this list, it must be selected in the server list (via touch screen or mouse click).
The currently selected web server is displayed in input field Server.
If a port number is not specified together with the server, port 80 is used by default.
If the web server is available on a different port, the port must be specified explicitly together with the IP address
or hostname:
Syntax Example
IP address:Port 10.23.20.17:8080
Hostname:Port webserver1:8081
Information:
If the entered IP address is incomplete or no web server exists for the IP address or entered hostname,
then only the boot logo (if enabled) or standard animation of the web browser will be displayed when
connecting to the web server.
Power Panel T80 User's manual V1.03
Server
IP address or hostname
Virtual keyboard
Show virtual keyboard in web
Disable pinch gesture
Disable zooming via pinch gesture
Developer tools
Enable developer tools in browser (volatile setting)
Add client certificate
Press to add a client certificate from a USB flash drive
Remove client certificate
Press to remove the client certificate from the system
webserver1
webserver2
Description
A connection to IP address 10.23.20.17 is established on port 8080.
A connection to host webserver1 is established on port 8081.
webserverX
✓
Configuration
53