Configuration; Service - B&R Power Panel T80 User Manual

Configuration

6 Configuration
The Power Panel can be configured in the following ways:
• Via the service page of the Power Panel (see
• Via OPC UA (OPC UA server must be enables beforehand)
• Via update:
➯
Updating with Automation Studio and USB flash drive
➯
Updating with a downloaded from the website and USB flash drive
➯
Duplicating an existing setup using a USB flash drive
6.1 Service pages
T-Series Power Panels can be configured via the integrated service page. This service page can be opened in
various ways:
Opening the service page with a gesture
The service page can be opened with a
on page 50):
Gesture for opening the service page: Use a finger to swipe from the middle of the top edge of the touch screen
down over the entire touch screen area.
The setting for Screen rotation on service page
Other ways to open the service page
The following options are also available to open the service page:
• By pressing the left and right buttons of a connected USB mouse simultaneously for at least 2 seconds.
• Opened automatically after restarting the Power Panel if the corresponding Start mode is configured on
service page Startup (see service page
36
"Service pages" on page
Gesture if this is configured accordingly (see
Screen is decisive for the swiping direction.
"Startup" on page
36)
"Configuring the gesture"
41)
Power Panel T80 User's manual V1.03