3.11 User tips for increasing the service life of the display
3.11.1 Backlight
The service life of the backlight is specified by its "half-brightness time". An operating time of 50,000 hours would
mean that the display brightness would still be 50% after this time.
3.11.1.1 How
can
the service life of backlights be extended?
• Set the display brightness to the lowest value comfortable for the eyes.
• Use dark images.
• Reducing the brightness by 50%
3.11.2 Image persistence
Image persistence refers to the "burning in" of a static image on a display after being displayed for a long time. It
does not only occur with static images, however. Image persistence is also referred to in the technical literature as
screen burn-in, image retention, memory effect, memory sticking or ghost image.
There are 2 different types:
• Area type: This type
off for a long time.
• Line type: This
can
3.11.2.1 What causes image persistence?
• Static images
• No screensaver
• Sharp transitions in contrast (e.g. black/white)
• High ambient temperatures
• Operation outside of specifications
3.11.2.2 How
can
image persistence be reduced?
•
Switch
continuously between static and dynamic images.
• Prevent excessive differences in brightness between foreground and background elements.
• Use colors with similar brightness.
• Use complementary colors for subsequent images.
• Use screensavers.
3.12 Pixel
errors
Information:
Displays
can
contain faulty pixels (pixel errors) due to the manufacturing process. They are not
grounds for initiating a complaint or warranty claim.
Mobile Panel 40/50 User's manual V1.80
can
increase the half-brightness time by approximately 50%.
can
be seen in a dark gray image. The effect disappears if the display is switched
result in permanent damage.
Commissioning
79