B&R Power Panel T80 User Manual page 55

Add client certificate (button)
This function allows a client certificate to be stored on the device to authenticate the web browser on the server.
Saving the client certificate on the device:
1. Create a client certificate and copy it to a USB storage medium.
2. Connect the USB storage medium to the device.
3. Press button Add client certificate.
4. Select the corresponding USB drive in the following dialog box.
5. A list of all client certificates in the PKCS #12 standard (file extension ".p12") is displayed.
6. After the desired client certificate is selected, the password must be entered.
If the client certificate was created without a password, the input field must remain empty.
✓ If all data is entered correctly, the certificate on the device is stored in the certificate store of the web browser.
Information:
If a client certificate already exists on the device, it is replaced by the new one.
Remove client certificate
This function can be used to delete a client certificate stored on the device.
Deleting a client certificate from the device:
1. Press button Remove client certificate.
2. A confirmation prompt appears querying whether the client certificate should be completely deleted from the
device.
✓ After the confirmation prompt is confirmed, the client certificate is deleted from the device.
6.1.9.1 Using the developer tools
The developer tools make it possible to access the browser from any remote computer over the network. Developer
tools can help to edit pages on the fly and quickly diagnose problems.
Information:
To be able to use the developer tools, either
Information about the functionality and use of the developer tools:
Enabling remote developer tools:
1. On service page Startup, select start mode Web.
2. Enable option Developer tools on service page Web.
3. Set a valid and free port (Developer tools port).
4. On service page
Save &
✓ The web browser is started with the corresponding settings and enabled developer tools.
To use the remote developer tools, the following conditions must additionally be met:
• The Power Panel is accessible via the Ethernet network.
• The network and the computer used permit communication.
• A browser that supports the developer tools is required on the remote computer.
Launching the developer tools
If the developer tools are enabled and the web browser is started, the remote computer can launch the developer
tools for the Power Panel browser with the following URL:
➯ With the IP address of the Power Panel: http://IP address:Port
IP address
The IP address of the Power Panel is listed on service page
Port
The port was defined on service page
Power Panel T80 User's manual V1.03
(button)
Exit, save the settings and leave the service page with Save changes & exit.
Web
Google Chrome or the
About & Info.
when enabling option Developer tools (default setting: 9222).
Configuration
Chromium is required.
Chrome DevTools
55