Installation Instructions - B&R Power Panel T80 User Manual

5.1.3 Installation instructions

The Power Panel must be installed using the retaining clips included in delivery.
In order to guarantee sufficient air circulation, allow the specified amount of space above, below, to the side and
behind the Power Panel. The minimum specified spacing is indicated in the following schematic diagrams. This
applies to all Power Panel variants.
Information:
In worst-case operation, the specified spacing for air circulation applies at the maximum specified
ambient temperature (see "Temperature specifications" in chapter "Technical data") in compliance
with the permissible mounting orientations (see
If the specified spacing for air circulation cannot be observed, either a corresponding derating must
be taken into account (see
temperature must be monitored by the user (see
Power Panel T80 User's manual V1.03
>40 mm
>45 mm
"Derating the ambient temperature" on page
>40 mm
Air outlet
Air intake
"Mounting orientations" on page
"Temperature monitoring" on page
Commissioning
32).
15) or the internal housing
75).
31