Service - B&R Power Panel T80 User Manual

Configuration
6.1.3 Service page Network
The default settings for service Network appear as follows:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Information:
Network configuration changes do not require the Power Panel to be rebooted and are applied by
the system and processed immediately after saving the settings and exiting the service pages (see
"Service page Save & Exit" on page
Hostname
Default setting: EMPTY (no hostname defined)
The Power Panel is identified in the network using its IP address or hostname. If a hostname is entered here, the
Power Panel can be identified in the network using this name, which allows it to be accessed (e.g. by Automation
Studio).
Important information:
• The hostname must be unique in the network.
• The name can have a maximum length of 64 characters.
DHCP
Default setting: Enabled
When the Dynamic Host Configuration Protocol (DHCP) is enabled, the network configuration is automatically
obtained from the DHCP server and assigned to the Power Panel; otherwise, it must be entered manually (e.g. IP
address of the device, IP address of the gateway, etc.).
For information about manual network configuration, see
Activate DNS
3)
Default setting: Enabled
DNS usage of the device (DNS client) can be enabled or disabled with this option.
If a hostname is entered in
server can be resolved and the associated IP address can be obtained from the DNS server.
In order to use DNS functionality, appropriate infrastructure must be available within the network.
3)
For more information, please contact your network administrator.
42
Hostname
Specify the name of the device on the
network
DHCP
Use automatic network configuration
Activate DNS
Activate DNS service
DNS suffix
Get DNS from DHCP server
68).
VNC or web mode, this option must be enabled so the hostname of the VNC or web
DnsSuffix
"Network configuration without DHCP" on page
✓
✓
✓
44.
Power Panel T80 User's manual V1.03