B&R Power Panel T80 User Manual page 60

Configuration
Load configuration from PLC
This function searches for controllers in the network that have a valid configuration for a Power Panel. After the
search is complete (a few seconds), the discovered controllers are listed:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
When selecting an entry, a list with the configurations of all Power Panels for the selected controller is displayed:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
The names of the listed configurations match the names of the configurations in Automation Studio:
If a configuration entry is selected, a dialog box appears requesting confirmation for installing the configuration.
After the data is loaded, the application changes to service page Save & Exit, and the data can be saved using
a corresponding command. Alternatively, the user can check and – if necessary – modify the loaded settings on
any of the service pages before saving.
Load boot logo / animation
If no USB storage medium is connected, an appropriate message is displayed.
If at least one USB storage medium is connected, then a dialog box with USB interfaces IF3 and IF4 is displayed.
The name of the USB storage medium is also displayed to aid in selection. After the interface is selected, the boot
logo and/or the boot animation are loaded and stored on the Power Panel.
The following syntax must be used for filenames:
File type Filename
Boot logo PPTLogo.bmp.gz (see
Boot animation PPTLogoA.gif (see
If a boot logo and/or boot animation are already on the Power Panel, they will be overwritten.
60
(button)
Server 1
Server 2
Server 3
Server 4
Server 5
Server 1
Config1
Config2
Config3
Config4
Server 2
(button)
"Boot logo" on page
"Boot animation" on page
74)
74)
Power Panel T80 User's manual V1.03
IP 10.0.0.1
MAC: 00 60 65 10 12 01
IP 10.0.0.2
MAC: 00 60 65 10 12 02
IP 10.0.0.3
MAC: 00 60 65 10 12 03
IP 10.0.0.4
MAC: 00 60 65 10 12 04
IP 10.0.0.5
MAC: 00 60 65 10 12 05
IP 10.0.0.1
MAC: 00 60 65 10 12 01
IP 10.0.0.2
MAC: 00 60 65 10 12 02
IP 10.0.0.3