Service - B&R Power Panel T80 User Manual

6.1.8 Service page VNC
In order to use the Power Panel as a VNC client, some settings are necessary:
Startup
Network
Time
Screen
Audio
Gesture
VNC
Web
Storage
Update
Backup & Reset
Security
OPC UA
Save & Exit
About & Info
Server
Default setting: EMPTY (no server entered or selected)
In order to use the Power Panel as a VNC client, a hostname or IP address for the VNC server must be specified.
It is possible here to enter multiple servers in a list. Entering the hostname or IP address and then clicking on the
[+] icon adds the specified server in the list at the end of this services page (see "vncserver1" and "vncserver2"
in the previous image).
To use a specific VNC server from this list, it must be selected in the server list (via touch screen or mouse click).
The currently selected VNC server is displayed in input field Server.
By default, port 5900 is used to establish a connection.
If the VNC-based HMI application is available on a different port, the port number must be specified explicitly
together with the IP address or hostname:
Syntax Example
IP address:Port 10.23.19.48:5907
Hostname:Port vncserver1:5908
Information:
If the entered IP address is incomplete or no VNC server exists for the IP address or entered hostname,
a corresponding message will be output if a connection attempt fails in VNC mode.
This error message is only output if option Show boot logo is disabled in start mode VNC.
Password
Default setting: EMPTY (no password entered)
Input range: Max. 100 characters
Note: Only one password can be entered, which is only used for the currently selected VNC server.
If a password has been entered, then the VNC client (Power Panel) is connected to the VNC server without an
additional password query.
If no password has been entered, then the password will be queried on the Power Panel each time a connection
to the VNC server is established.
The password is stored on the device in configuration file PPT80Config.xml .
Power Panel T80 User's manual V1.03
Server
IP address or hostname
Password
Max. 100 characters
Show password
Encrypt password
Save VNC password in encrypted form
Use RFB extension
Enable local window scaling
vncserver1
vncserver2
Description
A VNC connection to IP address 10.23.19.48 is established on port 5907.
A VNC connection to host vncserver1 is established on port 5908.
vncserverX
●●●●●●●●
✓
Configuration
51