Configuration Tool (Developer Version) - B&R PLC PP15 Reference Manual

2.5

Configuration Tool (developer version)

The PP15 is configured with the help of the CAN-Bus using a PC and the
PPTool program.
The PC which is equipped with a CAN interface (R60/R70) is connected
to the PP15, no matter whether the amplifiers to be controlled are
connected or not.
With the configuration tool the amplifiers to be controlled are registered
in the PP15 (dbCAN-ID) and the presets assigned to the respective keys
or inputs are stored.
For a detailed description of the configuration possibilities and the
configuration tool, please contact d&b support at
software.support@dbaudio.com.
Fig. 10: Model assembly/layout for configuration of PP15
B&R PLC PP15 for use with the, d&b Remote network, Reference manual (1.1 EN) Page 13 of 16